Industrial Process Controls :: Manufacturers

per page

Field Indicators Flowmetrics

Field Indicators are secondary display devices. They also amplify, filter, condition, scale, and convert low level "raw" signals produced by many transducers and convert it into the desired industry standard high level signal prior to transmitting it across potentially environments.

      Flow Computers & Batch Controllers
        
        Flow Batch Controllers are special purpose instruments which are intended to be used in conjunction with a flow sensor and control valve to dispense a desired amount of fluid into a container, tank, or vehicle.  In some cases the temperature may also by used to estimate the fluid density form stored fluid properties.  Our batch controllers are capable of Batch Overrun Compensation, Two-Stage Batching, Slow Fill, Count Mode, as well as providing for a variety of other functions such as printing and remote start/stop.

FM Series Turbine Flowmeters

FM Series turbine flowmeters provide exceptionally reliable digital outputs. These flowmeters are being used for a wide variety of liquid and gas flow sensing applications. FM Series range in size from 1/2 inch to 12 inches, offers a high turn-down with minimum uncertainty and very repeatable output. The turbine flowmeter is ideal, if the liquid to be metered has a viscosity of 500 cst or less for 2 inch and larger flowmeter, and 200 cst for smaller than 2 inch flowmeters.

      FMG Series positive displacement flowmeters
        
        The FMG Series positive displacement flowmeter is used with low, medium, or high viscosity fluids.  Used in numerous hydraulic test stands, aerospace,automotive, and petrochemical industries, the FMG is well suited for batch mixing and lube oil blending.

FMP Series Insertion Flowmeter

FMP Series prime application is large diameter pipes or ducts where traditional flow meter equipment is bulky, expensive, or difficult to maintain. FMP Series are well suited in applications exhibiting high-pressure drop characteristics and/or limited flow ranges where "in-line" flow meters would not be suitable. Ranges: Liquid 0.3 FPS, Gas 1.0 FPS.

      FMT Series Flowmeters
        
        FMT Flowmeters are capable of measuring extremely low flow rates (0.002GPM in liquids and 0.01 ACFM in gases).  The FMT flowmeter is a unique volumetric device which uses a dual-orifice design to direct a stream of fluid tangent to low mass/balanced rotor and a precision bearing to provide maximum sensitivity.  This geometry also eliminates the need for flow straighteners and allows for greater repeatability.

MAG/RF Pickups

These Pickups are hermetically sealed for resistance to moisture and other atmospheric contamination and can withstand repeated thermocycling in temperatures ranging from -450 degrees F to 450 degrees F.

      Ratemeters/Totalizers Flowmetrics
        
        Rate/Totalizers are available to work with most flowmeter types and most common electrical signals produced by flowmeters.  In some cases and amplifier or signal conditioner may be necessary.  Non-Linearity corrections are available in some units.

Series 2000 Variable Area Flowmeters

Series 2000 Variable Area Flowmeter is a rugged industrial flowmeter available in a wide range of liquid and gas flow rates. Series 2000 family includes flowmeters with a scale lengths of 150mm and 250mm.

      Series 2600 Variable Area Flowmeters
        
        Series 2600 (single stage) 600mm flowmetering panels offer the highest precision available in our product line of variable area flowmeters.  Available capacities of 2.8cc/min up to 180 GPM for liquid or 100cc/min to 750 SCFM for gas.  Suited for temperatures up to 250 degrees F/ 121 degrees C, can be mounted in-line or as a panel installation.  Connections are available as NPT or MS and Vertical/Horizontal Flange.

Series 4600 Variable Area Flowmeters (multi-stage)

Series 4600 (Multi-Stage) 600mm flowmetering panels offer the highest precision available in our product line of variable area flowmeters. This line has available capacities of 2.8cc/min up to 180 GPM for liquid or 100 cc/min to 750 SCFM for gas. Suited for temperatures of to 250 degrees F/ 121 degrees C, it can be mounted in-line or as a panel installation. Connections are available as NPT or MS and Vertical/Horizontal Flange.

      Signal Conditioners Flowmetric
        
        Signal conditioners are secondary devices intended to amplify, filter, condition, scale, and convert low level "raw" signals produced by many transducers and convert it into the desired industry standard high level signal prior to transmitting it across potentially noisy environments.  In some cases a secondary function is providing signal isolation.